Home » Posts taggedcutting tool

face mill-face milling cutter,cutting tool

SC introduced the M6132 face mill, a product designed for coarse, stainless steel turbine housing. The positive geometry of the tool provides smoother cutting, which helps the machine shop to eliminate vibrations. In turn, higher metal removal rates are reported to be achievable, shortening the cycle. The geometry...
Continue reading

VHM tool-cutting tool,end mill cutter

This top coating technical standard is also used in the new Superstar 4G. Under the condition of temperature stability, using the most advanced grinding machine, special tile coating and the end of the additional processing, can also help in the process of the high performance of high-performance computing...
Continue reading

End Mill-cutting tool,carbide end mills

The Anatomy Of An End Mill For Aluminum There are four barriers to aggressively milling aluminum: chatter, chips adhering to the tool, the abrasiveness of the material and controlling the large volume of chips. Cutting tool manufacturer says all of these challenges can be addressed with the right...
Continue reading

tool coating-cutting tool,carbide milling cutter

tool coating The coating tool has the characteristics of high surface hardness, good wear resistance, stable chemical resistance, heat and oxidation resistance, small friction factor and low thermal conductivity. The cutting tool can improve the tool life by 3 to 5 times or more Cutting speed of 20%...
Continue reading

PCBN blade-cutting tool,PCBN tools,

The PCBN blade also has a full section and blade profile. The full section blade has a complete PCBN roof, sintered on a hard alloy substrate, and provides multiple cutting edges only on the side of the blade, which is cheaper than the overall blade. The razor blade is...
Continue reading

tungsten drill-cutting tool,indexable drilling

In order to improve productivity, accuracy and overall quality, the company has developed a new tungsten drill to improve all these facts for end users. The tungsten drill is the world’s first indexable range of drilling, which provides two side inserts with six cutting edges to reduce consumption....
Continue reading

end mills-carbide insert,cutting tool

The squareness of the insert helps determine the tool’s ability to generate this smooth wall. If the insert has a straight side edge, it has to be set in the tool body so that the edge is precisely square with the work. If not, then this cocked insert will...
Continue reading

aluminum end mill-cutting tool,milling cutter

Oxides left in the aluminum from the melting or casting process are a source of abrasiveness in all aluminum grades. In fact, many industrial abrasives contain the same material—aluminum oxide. Cast grades of aluminum can contain aluminum oxides left over from the sand-cast process and can also contain...
Continue reading