Home » Posts taggeddrill bit

performance of threads-drill bit,tap tool

Many variables affect the performance of threads and the faucet used to generate them. A very important factor is the size of the drill used to generate the hole that will be mined. Most of the taps are only about the size of a drill bit, which will...
Continue reading

CNC tool-carbide cutting tools,Carbide drill, drill bit

Tool grinding professional conditions Grinding center hardware representative: CNC tool grinder, manual tool grinder, coating equipment. Grinding wheel: grinding wheel is grinding tool. HSS tool with CBN grinding wheel grinding, carbide cutting tools with diamond grinding wheel grinding. To correctly select the wheel, with particular attention to the...
Continue reading

cutting tools-carbide drill,drill bit

Tool grinding standards: for different parts of the material is different from the different parameters (front and rear angle, drill core form, edge processing form, etc.); different manufacturers of cutting tools are often different blade, the need to establish a different grinding method; Of the customers need to...
Continue reading

Drills-cutting tool,drill bit

A drill is a cutting tool used by a drill or drill machine to cut out a circular hole. The basic principle of the drill is to rotate the drill bit, cut the workpiece and remove the cuttings from the drill groove. It includes drills for mechanical, carpentry,...
Continue reading

Drills-drill bit,drilling machine,center drill

PCB bit types PCB drill point of drill bit type: PCB drilling with three straight shank twist drill, drill shank twist drill bits and handle the shovel (undercut) bit.Straight shank twist drill bits are used for the single head drilling machine, drilling and simpler PCB or single panel...
Continue reading

Drills-diamond bit,drilling tool

Short for diamond composite (PDC) bit. It is a kind of drilling tool commonly used in oil drilling industry. PDC product performance is constantly improving, and over the past few years, the quality and type of PDC cutting teeth have undergone tremendous changes. If the teeth of the...
Continue reading

Drills-drill bit,cutting drill

The edge of the drill must swing up and down, and the tail of the drill can not be warped. This is a standard bit grinding action. The main cutting edge swings up and down on the grinding wheel, that is, the hand holding the front of the...
Continue reading

Drills-drilling machine,drill bit

The clamping length of shank diameter of 4 ~ 5 times before to handle drills in the spring chuck. Always check the spindle presser foot. The contact surface of the presser foot should be horizontal and vertical to the main shaft, so as to prevent drilling and partial...
Continue reading

Drills-drill bit,cutting bit

1, horizontal blade The sharpness of the cross edge is very poor. A large diameter drill bit made relatively coarse, chisel edge is big, in addition, the chisel edge grinding to drill in heavy grinding, the horizontal edge will become big. In order to increase sharpness, or restore...
Continue reading

drills-tungsten steel drills,carbide drills

Tungsten steel drill Tungsten bit is divided into four types: the foundation of the whole drill bit, tungsten steel drills with indexable inserts, welding type and replace tungsten steel tungsten steel drill bit crown drill. The number of welding with tungsten steel drill, arrangement, and welding of different...
Continue reading